M 8.0x(1.25) HSSEL DIN 371 ISO2 TIN

NRX1510080
Laos
 
Thread MCoatingThread standardTyp NChamfer BTap materialProfile sketchTap standardThread toleranceHole type
 

CATALOGUE NUMBER: 1510

Machine tap with straight flutes and spiral point, metric, DIN 371, TiN coated, suitable for structural steels, plain cast steels, free cutting steels, possible use in short chipping copper alloys, spheroidal and malleable cast iron, aluminium alloys Si<10%.

 

MACHINED MATERIALHOLE TYPECUTTING SPEEDLUBRICATIONUSE
Aluminium alloys si content < 10% through hole (thread length L > 1,5xd1) 15-30
E
 
Recommended use
 
Aluminium alloys si content < 10% through hole (thread length L < 1,5xd1) 15-30
E
 
Recommended use
 
Aluminium alloys si content > 10% through hole (thread length L < 1,5xd1) 14-20
E
 
Possible use
 
Aluminium alloys si content > 10% through hole (thread length L > 1,5xd1) 14-20
E
 
Possible use
 
Copper alloys (short chipping) through hole (thread length L > 1,5xd1) 15-25
O/E
 
Possible use
 
Copper alloys (short chipping) through hole (thread length L < 1,5xd1) 15-25
O/E
 
Possible use
 
Free cutting steels up to 800 N/mm2 through hole (thread length L < 1,5xd1) 10-14
O/E
 
Recommended use
 
Free cutting steels up to 800 N/mm2 through hole (thread length L > 1,5xd1) 10-14
O/E
 
Recommended use
 
Plain cast steels up to 500 N/mm2 through hole (thread length L < 1,5xd1) 8-12
O/E
 
Recommended use
 
Plain cast steels up to 500 N/mm2 through hole (thread length L > 1,5xd1) 8-12
O/E
 
Recommended use
 
Plain cast steels up to 800 N/mm2 through hole (thread length L > 1,5xd1) 12-15
O/E
 
Recommended use
 
Plain cast steels up to 800 N/mm2 through hole (thread length L < 1,5xd1) 12-15
O/E
 
Recommended use
 
Spheroidal graphite cast iron and malleable cast iron through hole (thread length L < 1,5xd1) 6-8
E
 
Recommended use
 
Spheroidal graphite cast iron and malleable cast iron blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) 6-8
E
 
Recommended use
 
Spheroidal graphite cast iron and malleable cast iron through hole (thread length L > 1,5xd1) 6-8
E
 
Recommended use
 
Structural steels and heat-treated steels up to 800 N/mm2 through hole (thread length L > 1,5xd1) 12-15
O/E
 
Recommended use
 
Structural steels and heat-treated steels up to 800 N/mm2 through hole (thread length L < 1,5xd1) 12-15
O/E
 
Recommended use
 
Structural steels up to 500 N/mm2 through hole (thread length L > 1,5xd1) 6-10
O/E
 
Recommended use
 
Structural steels up to 500 N/mm2 through hole (thread length L < 1,5xd1) 6-10
O/E
 
Recommended use
 
Juhul kui on küsimusi meie tootevaliku kohta,
helista tööpäeviti 8-17 telefonil 677 5671 või 672 0266